![]() If you have any questions about PEEK or the processing of this material, please do not hesitate to contact us. We can produce various objects using our CNC turning and milling machines, tailored to your requirements and dimensions. If you order PEEK from Induflex, the standard material is FCM. We will of course be happy to advise you. Please feel free to contact us for advice or questions about additives and their effects. Please note that FCM approval does not apply for the above additives. PEEK with GF is not suited to loads and wear applications, since the material tends to grind on matt surfaces. Furthermore, glass fibre improves the crimp rigidity and dimensional stability. Purpose: Increases mechanical strength and rigidity.Where boiling or super-heated steam is present, this type of PEEK has optimal hydrolysis resistance. PEEK with CF conducts heat more easily, which increases the service life of wear parts. There are several different applications and areas that PEEK seals can be found in such as valves. Purpose: CF increases rigidity and crimp resistance and provides better sliding and friction characteristics. While UHMW, nylon, and acetal are the most utilized plastics for a wide variety of these applications, PEEK plastic offers additional benefits for specifically. Our PEEK plastic, produced by the extrusion process, meets the strict requirements of both ISO 23936-1 and NORSOK M-710 that is required for sour gas and other challenging environments throughout the natural gas and petroleum industry.PEEK also performs well in applications where continuous high temperatures (up to 500 ☏/260 ☌) are common.It is possible to modify PEEK with the following additives: PEEK seals and manifolds are commonly used in fluid applications. It is extensively used in the aerospace, automotive, and chemical process industries. PEEK is finding increased use in spinal fusion devices and reinforcing rods. PEEK is considered an advanced biomaterial used in medical implants, e.g., use with a high-resolution magnetic resonance imaging (MRI), for creating a partial replacement skull in neurosurgical applications. It is one of the few plastics compatible with ultra-high vacuum applications. It has high resistance to biodegradation.Īpplications:Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, High-performance liquid chromatography columns, compressor plate valves, and electrical cable insulation. It is soluble in concentrated sulfuric acid at room temperature, although dissolution can take a very long time unless the polymer is in a form with a high surface-area-to-volume ratio, such as a fine powder or thin film. It is attacked by halogens and strong Bronsted and Lewis acids, as well as some halogenated compounds and aliphatic hydrocarbons at high temperatures. It is highly resistant to thermal degradation, as well as to attack by both organic and aqueous environments. The thermal conductivity increases nearly linearly with temperature between room temperature and solidus temperature. Some of the other items it’s used to make are. PEEK polymer is one of the few polymers that can be used in applications that require an ultra-high vacuum. Some grades have a useful operating temperature of up to 250 ☌ (482 ☏). While PEEK can come as a composite, fiberglass, or carbon fiber reinforcement, the unreinforced PEEK is known to provide the highest elongation and endurance of all grades of PEEK materials. PEEK has a glass transition temperature of around 143 ☌ (289 ☏) and melts around 343 ☌ (662 ☏). PEEK plastic is available in both sheet and rod form, making it an ideal choice for 3D printing. It has a broad range of applications in both the commercial and industrial sectors. The Young’s modulus is 3.6 GPa and its tensile strength 90 to 100 MPa. As a result, PEEK is often used in applications where the material is expected to endure high stress or forces, such as aerospace components, automotive parts. PEEK (Polyether Ether Ketone) is a high-performance engineering thermoplastic with excellent chemical and thermal resistance. The processing conditions used to mold PEEK can influence the crystallinity and hence the mechanical properties. Properties:PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. It was originally introduced by Victrex PLC, then Imperial Chemical Industries (ICI) in the early 1980s. Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications. Polyetheretherketone is clearly superior to other high-temperature polymers, due to its very high continuous service temperature.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |